Using The Setup Wizard - NETGEAR DGN2200-100NAS User Manual

Wireless-N 300 Modem Router DGN2200 User Manual

Using the Setup Wizard

You can manually configure your Internet connection using the Basic Settings screen, or you can
allow the Setup Wizard to detect your Internet connection. The Setup Wizard searches your
Internet connection for servers and protocols to determine your ISP configuration. This feature is
not the same as the Smart Wizard on the Resource CD that is used for installation.
To use the Setup Wizard:
1. To go to the Setup Wizard screen, from the top of the main menu, select Setup Wizard.
Figure 1-4
2. Select Yes for the Auto-Detect Connection Type, and then click Next to proceed.
Enter your ISP settings, as needed.The Setup Wizard detects your ISP configuration.
Depending on the type of connection, you are prompted to enter your ISP settings, as shown in
the following table.
Table 1-1. Auto-Detected Internet Connection Types
Connection Type
PPP over Ethernet (PPPoE)
PPP over ATM (PPPoA)
Dynamic IP Account Setup
1-4
ISP Information
Enter the login user name and password. These fields are case-
sensitive.
No entries needed.
v1.0, March 2010
Configuring Your Internet Connection