1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Wireless Router
  5. DGN2200v4
  6. Installation manual

NETGEAR DGN2200v4 Installation Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200v4:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Technical Support
Thank you for selecting NETGEAR products. NETGEAR
recommends that you use only the official NETGEAR support
resources.
After installing your device, locate the serial number on the label
of your product and use it to register your product at 
NETGEAR.com/register.
Registration is required before you can
use NETGEAR telephone support service. Registration through
the NETGEAR website is strongly recommended.
Visit
support.netgear.com
for product updates and web support.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
December 2012
N300 Wireless ADSL2+ Modem Router
DGN2200v4 Installation Guide

Package Contents

The box should contain the following items. If any items are
incorrect, missing, or damaged, contact your NETGEAR dealer.
N300 Modem Router
Power adapter
Filter/splitter
Phone cable
Ethernet cable
Note:
Your package might contain more items. The filter
or splitter provided depends on the region, and in some
locations, a CD is included.

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR DGN2200v4

Summary of Contents for NETGEAR DGN2200v4

  • Page 1: Package Contents

    Thank you for selecting NETGEAR products. NETGEAR The box should contain the following items. If any items are recommends that you use only the official NETGEAR support incorrect, missing, or damaged, contact your NETGEAR dealer. N300 Wireless ADSL2+ Modem Router resources.

  • Page 2: Connect To The Internet

    WEEE Directive. DSL Internet 4. Launch a browser. NETGEAR genie displays. Intended for indoor use only in all EU member states, EFTA states, and Switzerland. If you do not see genie, type www.routerlogin.net.

  • Page 3: Table Of Contents

    Contents Before You Begin ........2 Install Your Modem Router .

  • Page 4: Before You Begin

    For example, you could say: I need my DSL service user name and password. Can you help me? Note: If your provider says that they do not support NETGEAR services, tell them you need only your DSL user name and password;...
  • Page 5 DSL Internet Service Provider Phone Number AT&T DSL (not AT&T U-Verse) 877-722-3755 AT&T/BellSouth DSL (not AT&T U-Verse) 888-321-2375 CenturyLink 800-809-1410 CenturyLink (Qwest) 800-247-7285 Covad DSL 888-642-6823 EarthLink 888-829-8466 SureWest 888-639-1611 TDS DSL Support 866-571-6662 US Family 800-300-4256 Verizon 800-567-6789 Windstream 877-901-4692...

  • Page 6: Install Your Modem Router

    Install Your Modem Router A microfilter filters DSL interference out of standard phone equipment that shares the line with DSL service. Examples of devices are telephones, fax machines, answering machines, and caller ID displays. 1. Connect to the Internet. You can use a DSL connection or a cable/fiber Internet connection.
  • Page 7  To connect cable/fiber modem: Use an Ethernet cable to connect the cable/fiber modem to the Ethernet WAN port (labeled 4/WAN) on the rear panel of the modem router. 2. Add power to the modem router. To DSL Internet To cable/fiber Internet a.

  • Page 8: Preset Wireless Security

    3. Connect a computer. To DSL Internet To cable/fiber Internet You can use an Ethernet cable or connect wirelessly. • For a wired connection, use an Ethernet cable to connect your computer to an unused yellow Ethernet LAN port on your modem router.

  • Page 9: Wireless Network Settings

    NETGEAR recommends that you do not change the preset WiFi SSID or password. If you do change the settings, the SSID and password on the label no longer apply. WiFi network name Network key (SSID) (password) Wireless Network Settings Record the default preset wireless settings that are printed on the label in the spaces for easy reference.

  • Page 10: Join The Wireless Network

    Join the Wireless Network You can use either the Wi-Fi Protected Setup (WPS) method or the manual method to join your wireless network.  To join the network using WPS: Press the WPS button on the modem router. Within 2 minutes, press the WPS button on your wireless computer or device, or follow the WPS instructions that came with your wireless device to complete the WPS process.

  • Page 11: Access The Modem Router To Make Changes

    Access the Modem Router to Make Changes After you use NETGEAR genie to set up the modem router, you can log in to the modem router to view or change its settings.  To log in to the modem router: Launch a web browser from a computer or wireless device that is connected to the modem router.

  • Page 12: Troubleshooting

     To change the password for the modem router user name: Log in to the modem router. Select Advanced > Administration > Set Password. Type your old password. Type the new password twice Click Apply. Troubleshooting  If the browser does not display the web page: •...

  • Page 13: Readyshare Access

    (If your USB device has special drivers, it is not compatible.) If your USB device requires a power supply, use it when connecting your USB device to the modem router. It takes up to 2 minutes before the USB drive is ready for sharing. For more about ReadySHARE, visit www.netgear.com/readyshare.

  • Page 14: Other Features

    Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders.

Table of Contents