Viewing Or Manually Configuring Your Isp Settings - NETGEAR DGN2200-100NAS User Manual

Table 1-1. Auto-Detected Internet Connection Types (continued)
Connection Type
IP over ATM Classical IP
assignment (RFC1577)
Fixed IP (Static) Account Setup
3. At the end of the Setup Wizard, click Test to verify your Internet connection. If you have
trouble connecting to the Internet, see

Viewing or Manually Configuring Your ISP Settings

To view or configure the basic settings:
1. Log in to the wireless-N modem router as described in
Modem Router" on page
Configuring Your Internet Connection
Wireless-N 300 Modem Router DGN2200 User Manual
ISP Information
• Enter the assigned IP address, subnet mask, and the IP address
of your ISP's primary DNS server. If a secondary DNS server
address is available, enter it also.
• DNS servers are required to perform the function of translating
an Internet name such as
address. For a fixed IP address configuration, you must obtain
DNS server addresses from your ISP and enter them manually
here.
1. If required, enter the account name and domain name from
your ISP.
2. Select Use Static IP Address or Use IP Over ATM (IPoA —
RFC1483 Routed) according to the information from your ISP.
If you select IPoA, the router will detect the gateway IP
address, but you still need to provide the router IP address.
3. Enter your assigned IP address, subnet mask, and the IP
address of your ISP's gateway wireless-N modem router. This
information should have been provided to you by your ISP.
4. Enter the IP address of your ISP's primary DNS server. If a
secondary DNS server address is available, enter it also.
DNS servers are required to perform the function of translating
an Internet name such as
address. For a fixed IP address configuration, you must obtain
DNS server addresses from your ISP and enter them manually
here.
Chapter 7,
1-2.
v1.0, March 2010
www.netgear.com
www.netgear.com
"Troubleshooting."
"Logging In to Your Wireless-N
to a numeric IP
to a numeric IP
1-5