Scheduling Firewall Services - NETGEAR DGN2200-100NAS User Manual

3. Select your time zone. This setting is used for the blocking schedule according to your local
time zone and for time-stamping log entries.
Select the Adjust for Daylight Savings Time check box if your time zone is currently in
daylight savings time.
Note: If your region uses daylight savings time, you must manually select Adjust for
Daylight Savings Time on the first day of daylight savings time, and clear it at
the end. Enabling daylight savings time causes one hour to be added to the
standard time.
4. The wireless-N modem router has a list of NETGEAR NTP servers. If you would prefer to use
a particular NTP server as the primary server, select the Use this NTP Server check box, and
enter its IP address.
5. Click Apply to save your settings.

Scheduling Firewall Services

If you enabled services blocking in the Block Services screen or port forwarding in the Ports
screen, you can set up a schedule for when blocking occurs or when access is not restricted.
To block Internet services based on a schedule:
1. From the Schedule screen
2. If you want to limit access completely for the selected days, select All Day. Otherwise, to limit
access during certain times for the selected days, or enter times in the Start Time and End
Time fields.
Note: Enter the values in 24-hour time format. For example, 10:30 a.m. would be
10 hours and 30 minutes, and 10:30 p.m. would be 22 hours and 30 minutes. If
you set the start time after the end time, the schedule will be effective through
midnight the next day.
3. Click Apply to save your changes.
Protecting Your Network
Wireless-N 300 Modem Router DGN2200 User Manual
(Figure 3-7), select Every Day or select one or more days.
v1.0, March 2010
3-8