Factory Default Configuration - NETGEAR DGN2200-100NAS User Manual

Wireless-N 300 Modem Router DGN2200 User Manual
Table A-1. General Specifications (continued)
Specification
Regulatory compliance
Network protocol and
standards compatibility
Power adapter
Regulatory compliance
Interface specifications

Factory Default Configuration

You can use the Restore Factory Settings button on the bottom panel of your router to restore
factory default settings. Press this button for 6 seconds. Your router will return to the factory
configuration settings shown in the following table.
Table A-2. Factory Default Settings
Feature
Router Login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
A-4
Description
FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or
Routed Ethernet, and RFC 1577 Classical IP over ATM
North America: 120V, 60 Hz, input
FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A or B
ITU G.992.5 (ADSL2+)
v1.0, March 2010
Default Behavior
http://www.routerlogin.com
admin
password
Use default address
1492
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
Wall Mounting and Technical Specifications