NETGEAR DGN2200-100NAS User Manual page 71

Wireless-N 300 Modem Router DGN2200 User Manual
Table 5-2. USB Storage Advanced Settings
Fields
Network Device Name
Workgroup
Access Method Network Connection
HTTP
HTTP (via Internet)
FTP
FTP (via Internet)
Available Folder Name
Network Folders
Volume name
Total/Free Space
Share Name
Read/Write Access
5-8
Description
The default is readyshare. This is the name used to access
the USB device connected to the wireless-N modem router
from your computer.
If you are using a Windows Workgroup rather than a domain,
the Workgroup name is displayed here.
Enabled by default, this allows all users on the LAN to have
access to the USB drive.
Disabled by default. If you enable this setting, you can type
http://readyshare to access the USB drive.
Disabled by default. If you enable this settings, remote users
can type http://readyshare to access the USB drive over the
Internet.
Disabled by default.
Disabled by default. If you enable this settings, remote users
can access the USB drive via ftp over the Internet.
Full path of the used by the Network Folder.
Volume name from the storage device (either USB drive or
HDD).
The current utilization of the storage device.
• You can click the name shown or you can type it into the
address field of your Web browser.
• If Not Shared is shown then the default share has been
deleted and no other share for the root folder exists. Click
the link to change this setting.
• Shows the permissions/access controls on the Network
Folder:
• All -no password allows all users to access the Network
Folder.
• admin prompts you to enter the same password that you use
to log in to the wireless-N modem router main menu.
v1.0, March 2010
USB Storage