NETGEAR DGN2200-100NAS User Manual page 56

Wireless-N 300 Modem Router DGN2200 User Manual
The Router Status screen provides status and usage information, including the following settings.
Table 4-1. Router Status Fields
Component Field
Account Name
Firmware
Version
ADSL Port MAC Address
IP Address
Network Type
IP Subnet Mask This field displays the IP subnet mask being used by the Internet
Gateway IP
Address
Domain Name
Server
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask This field displays the IP subnet mask being used by the local (LAN)
4-6
Description
The host name that is assigned to the wireless-N modem router in the
Basic Settings screen.
This field displays the wireless-N modem router firmware version.
This field displays the Ethernet MAC address being used by the
Internet (ADSL) port of the wireless-N modem router.
This field displays the IP address being used by the Internet (ADSL)
port of the wireless-N modem router. If no address is shown, the
wireless-N modem router cannot connect to the Internet.
The network type depends upon your ISP.
(ADSL) port of the wireless-N modem router.
IP address used as a gateway to the Internet for computers configured
to use DHCP.
This field displays the DNS server IP addresses being used by the
wireless-N modem router. These addresses are usually obtained
dynamically from the ISP.
This field displays the Ethernet MAC address being used by the local
(LAN) port of the wireless-N modem router.
This field displays the IP address being used by the local (LAN) port of
the wireless-N modem router. The default is 192.168.0.1.
If Off, the wireless-N modem router does not assign IP addresses to
PCs on the LAN.
If On, the wireless-N modem router does assign IP addresses to PCs
on the LAN.
port of the wireless-N modem router. The default is 255.255.255.0.
v1.0, March 2010
Managing Your Network