Battery Level Display - Toshiba Gigashot GSC-R60 Owner's Manual

Charging in the Camera
1
Open the terminal cover on the camera.
2
Connect the power cord and AC adapter and then plug the
power cord into the mains power socket.
3
Plug the DC plug on the AC adapter into the DC IN 10V
socket on the camera.
When battery charging begins, the STATUS LED on the camera lights red. When
charging is completed, the STATUS LED on the camera turns green.
IMPORTANT
• The battery is charged while in the camera. Never attempt to charge the battery
with another charger.
• If a problem arises during charging, unplug the power cord from the mains power
outlet, remove the battery from the camera and contact Toshiba Customer
Service Department or Toshiba Customer Support Department. Be careful when
removing the battery as it can become hot.
• If the camera is charged in conditions where it becomes hot (in direct sunlight,
etc.), the heat in the camera may trigger a sensor in the camera that prevents
charging from beginning immediately. If this occurs, allow the camera to cool fully
before charging.
MEMO
• To get the best possible performance from your battery, charge it when the
ambient temperature is between 50°F (10°C) and 86°F (30°C).

Battery Level Display

When you turn the camera on, the level of charge in the battery appears on the LCD
monitor.
Display
Meaning Fully charged
Terminal cover
Almost out of
Low charge
Running on the
charge AC adapter