Changing the Basic Camera Settings
This procedure specifies the underlying settings that apply when you use the camera, and
is referred to as Setup.
These settings are retained when the camera is turned off or Auto power off is activated.
1
Press the MENU button.
2
Use the jog dial to select [SETUP] and press the OK
button.
RECORDING MENU
REC PAUSE
LCD BRIGHTNESS
SETUP
DRIVE & ALBUM
EXIT
3
Use the jog dial to select a menu and press the OK button.
■ SETUP
SOUND
AUTO POWER OFF
EXIT
4
Use the jog dial to select the desired setting and press the
OK button.
The selected setting is set and the setup menu reappears.
5
To exit the setup menu, move the mode switch to the
desired mode.
The settings for the selected menu are appear.
SYSTEM
LED