Section Getting Started; Loading The Battery; Charge Your Battery - Toshiba CAMILEO X400 User Manual

Loading the Battery

The battery comes pre-installed in the camcorder, however you
must remove the insulator on the battery before use.
1. Slide the safety latch and open the battery cover.
2. Remove the battery from the camcorder and pull the
insulator off.
3. Insert the battery according to the correct polarity marks
( + or -).
4. Close the battery cover firmly.

Charge your battery

You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF.
A blinking light indicates active charging and a solid light indicates that charging is complete. In AC
charging mode, the full charging time is about 4- 5 hours and the light will turn off automatically after
3~5 minutes. (Actual charging time may vary. It depends on the battery condition.)
Getting Started
REMOVE
10
Section 2
EN