Problem
Operation
None of the
A system error has occurred.
buttons work.
Operation is
Too many images are stored on
slow.
the hard disk drive.
The remote
The remote control battery is
control does
not loaded in the correct
not work.
direction.
The battery in the remote
control is flat.
You are outside the effective
range.
There is a strong light shining
on the remote control sensor.
Cause
Solution
Slide the POWER switch across
and hold it in place for at least 5
seconds. Note that this may
result in the loss of any files that
are being created. Settings
such as the date and time may
also revert to their default
values. In this event, reset the
settings before using the
camera again.
Erase some images.
Edit some videos.
Move some images to a
different drive or onto a PC or
DVD, etc.
Load the battery correctly.
Fit a new battery.
Use the remote control at a
distance of up to around 4
meters and at an angle of up to
roughly 25° left or right of the
camera.
Avoid shining strong light
directly at the remote control
sensor.
Page
34
130
124
162
39
39
39
39