Removing the Battery
1
Open the battery cover.
2
Push the battery lock lever in the direction of the arrow
and remove the battery.
3
Close the battery cover.
IMPORTANT
• Always turn the camera off before removing the battery. Removing the battery
while the camera is still turned on may damage the camera or corrupt important
data. It may also cause the camera settings to revert to the defaults that were set
when you purchased the camera. If this occurs, specify your preferred settings
again.
• When removing the battery, take care not to drop the camera or battery.
• If you open the battery cover when an AC adapter is not connected, the power will
automatically go off.
When you push the battery lock lever, the battery pops up
slightly and comes out.