Troubleshooting - Toshiba Gigashot GSC-R60 Owner's Manual

Troubleshooting

If an error or fault occurs, first check the error message displayed on the screen (
p.195) and the status of the LEDs (
Problem
Power/Preparation
I can't charge The battery is not loaded in the
the battery. correct direction.
The AC adapter is not
connected.
The camera is not set in the
cradle properly.
The camera is turned on.
The camera or battery is
overheated.
The camera The battery is not loaded in the
won't turn on. correct direction, or the AC
adapter is not connected.
The battery is out of charge.
The battery has reached the
end of its service life.
The camera The battery is out of charge.
runs out of
The terminals are soiled.
power too
quickly.
The battery has reached the
end of its service life.
The camera The Auto power off function was
suddenly lost activated.
power.
Auto power off Auto play is running.
does not work.
You are connected to a DVD
recorder with DVR, computer,
or printer.
The camera is in LAN mode.
The camera is connected to a
printer with PictBridge.
p.25). Then refer to the information given below.
Cause Solution
Reload the battery correctly.
Connect the AC adapter.
Set the camera in the cradle
correctly.
Turn the camera off.
Allow the camera or battery to
cool fully before charging.
Reload the battery correctly.
Connect the AC adapter.
Charge the battery.
Replace it with a new battery.
Charge the battery.
Wipe the terminals on the
battery and in the camera with a
clean, dry cloth.
Replace it with a new battery.
Turn the camera back on.
Change the Auto power off
settings.
Stop Auto play.
Auto power off is not available
when connected to a DVD
recorder with DVR, computer,
or printer.
Change the mode.
Exit PictBridge.
Page
28
30
30
34
30
28
30
30
28
30
32
28
34
139
111
139
26
123