Writing Print Information (Dpof Settings); Writing Print Information - Toshiba Gigashot GSC-R60 Owner's Manual

Writing Print Information (DPOF Settings)

Use this procedure to specify the settings for date display and the number of prints of
images you want to print in DPOF-format (see "Glossary"
POINT
• DPOF settings allow you print images simply by taking an SD card to a retail store.
• You can also print your images at home on a DPOF-compatible printer.
ATTENTION
• DPOF settings can only be specified for still images on an SD card. Copy the
images from the hard disk drive to an SD card beforehand.
See "Copying Images"
Specifying Individual DPOF Settings
1
From the play menu, use the jog dial to select [DPOF] and
press the OK button.
PLAY MENU
DPOF
PictBridge
VIDEO EDITING
EXIT
2
Use the jog dial to select [SET] and press the OK button.
DPOF
SET OR CLEAR
THE DPOF SETTINGS.
SET
3
Use the jog dial to select the image for which DPOF
settings are to be set and move the OK button to
to set the number of prints.
DPOF
00
00
SELECT ALL
OK
OK
p.115.
If the hard disk drive is set as the playback drive, a
COPY
message appears saying [ONLY STILL IMAGES ON SD
MOVE
CARDS ARE DPOF TARGET IMAGES.].
Use the jog dial to select [TO SD] and press the OK
button.
CLEAR ALL
To move to the previous or next album, move the OK
100-0021
button to
You can specify up to 99 prints per image.
NEXT ALBUM
TOTAL 0000
CANCEL
p.197).
or respectively.
or