Viewing Camera Images On A Pc - Toshiba Gigashot GSC-R60 Owner's Manual

Viewing Camera Images on a PC

Use this procedure to display your photographed images on the PC.
1
Select USB mode.
The gigashot backup tool starts up.
See "Connecting to a PC"
2
Click [View data using ACDSee].
MEMO
• When you connect the camera to the PC, the camera's built-in hard disk drive is
displayed on the PC as "gigashot internal drive" and the SD card is displayed as
a "gigashot SD card".
• You can also launch the gigashot backup tool by clicking "gigashot Backup Tool"
from the "Acquire" icon in ACDSee.
• The gigashot backup tool can be started up if the "Toshiba Device Detector" is
displayed in the Windows taskbar. If the "Toshiba Device Detector" is not
displayed, click the "Toshiba Device Detector" from the "Acquire" icon in ACDSee.
IMPORTANT
• Always play gigashot videos in ACDSee or PowerProducer. The videos may not
play correctly in other software applications.
p.150.
ACDSee starts up.
Use this to select the camera drive (hard disk
drive or SD card).