Toshiba Gigashot GSC-R60 Owner's Manual page 83

Overwriting Preset Data
This procedure stores new preset data for the current light source.
1
Select [PRESET] and use the jog dial to select
[OVERWRITE DATA] from the menu that appears. Then
press the OK button.
WHITE BALANCE
OVERWRITE DATA
USE DATA
OK
2
Position a white subject (a white dish or piece of paper) so
that it fills the displayed frame and press the OK button.
WHITE BALANCE
DISPLAY A WHITE OBJECT IN
THE CENTER, THEN PRESS THE OK BUTTON.
MEMO
• When you are setting the white balance, ensure that the subject (the white dish
or piece of paper) completely fills the displayed frame.
Using Preset Data
This section explains how to use existing preset data.
1
Select [PRESET] and use the jog dial to select [USE
DATA] from the menu that appears. Then press the OK
button.
WHITE BALANCE
OVERWRITE DATA
USE DATA
OK
A message is displayed.
A message is displayed and the camera is then ready to
shoot.
The camera reverts to recording mode.