Port Setup; Figure 28 Basic Setting > Port Setup - ZyXEL Communications Dimension GS-2024 User Manual

Chapter 7 Basic Setting
Table 11 Basic Setting > IP Setup (continued)
LABEL
IP Address
IP Subnet
Mask
VID
Default
Gateway
Add
Cancel
Index
IP Address
IP Subnet
Mask
VID
Default
Gateway
Manageable
Delete
Cancel

7.7 Port Setup

Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the
navigation panel to display the configuration screen.
Figure 28 Basic Setting > Port Setup
72
DESCRIPTION
Enter the IP address for managing the Switch by the members of the VLAN specified in
the VID field below.
Enter the IP subnet mask in dotted decimal notation.
Type the VLAN group identification number.
Enter the IP address of the default outgoing gateway in dotted decimal notation.
Click Add to save the new rule to the Switch's run-time memory. It then displays in the
summary table at the bottom of the screen.
Click Cancel to reset the fields.
This field displays the index number of an entry. Click an index number to edit the rule.
This field displays the IP address.
This field displays the subnet mask.
This field displays the VLAN identification number of the network.
This field displays the IP address of the default outgoing gateway.
This field displays whether the Switch can be managed using the specified IP address.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
GS-2024 User's Guide