Configuring Queuing; Figure 60 Advanced Application > Queuing Method; Table 37 Advanced Application > Queuing Method - ZyXEL Communications Dimension GS-2024 User Manual

Chapter 17 Queuing Method

17.2 Configuring Queuing

Click Advanced Application > Queuing Method in the navigation panel.
Figure 60 Advanced Application > Queuing Method
The following table describes the labels in this screen.
Table 37 Advanced Application > Queuing Method
LABEL
Method
Q0-Q3
Weight
Apply
Cancel
124
DESCRIPTION
Select SPQ (Strictly Priority Queuing) or WRR (Weighted Round Robin).
Strictly Priority services queues based on priority only. When the highest priority queue
empties, traffic on the next highest-priority queue begins. Q7 has the highest priority and
Q0 the lowest.
Weighted Round Robin Scheduling services queues on a rotating basis based on their
queue weight (the number you configure in the queue Weight field). Queues with larger
weights get more service than queues with smaller weights.
This field is applicable only when you select WRR.
When you select WRR enter the queue weight here. Bandwidth is divided across the
different traffic queues according to their weights.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS-2024 User's Guide