Switch Access And Login - ZyXEL Communications Dimension GS-2024 User Manual

Chapter 32 Troubleshooting

32.2 Switch Access and Login

I forgot the IP address for the Switch.
1 The default IP address is 192.168.1.1.
2 Use the console port to log in to the Switch.
3 Use the management port to log in to the Switch.
4 If this does not work, you have to reset the device to its factory defaults. See
on page
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
32.1 on page
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
Section 3.3 on page
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
4 Make sure your computer is in the same subnet as the Switch. (If you know that there are
routers between your computer and the Switch, skip this step.)
5 Reset the device to its factory defaults, and try to access the Switch with the default IP
address. See
6 If the problem continues, contact the network administrator or vendor, or try one of the
advanced suggestions.
Advanced Suggestions
• Try to access the Switch using another service, such as Telnet. If you can access the
Switch, check the remote management settings and secured client settings to find out why
the Switch does not respond to HTTP.
220
51.
219.
(Section 7.6 on page
I forgot the IP address for the Switch.
41.
Appendix A on page
Section 4.6 on page
69), use the new IP address.
233.
51.
Section 4.6
Section
GS-2024 User's Guide