Figure 87 Ip Application > Diffserv; Table 56 Ip Application > Diffserv - ZyXEL Communications Dimension GS-2024 User Manual

Figure 87 IP Application > DiffServ
The following table describes the labels in this screen.
Table 56 IP Application > DiffServ
LABEL
Active
DSCP to
802.1p
Mapping
0 ... 63
Apply
Cancel
GS-2024 User's Guide
DESCRIPTION
Select this option to enable DiffServ on the Switch.
This is the DSCP classification identification number.
To set the IEEE 802.1p priority mapping, select the priority level from the drop-down
list box.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 22 Differentiated Services
165