Figure 23 Status: Port Details; Table 7 Status > Port Details - ZyXEL Communications Dimension GS-2024 User Manual

Figure 23 Status: Port Details

The following table describes the labels in this screen.
Table 7 Status > Port Details
LABEL
Port Info
Port NO.
Name
Link
State
LACP
TxPkts
RxPkts
Errors
Tx KB/s
GS-2024 User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbpsl, 1000M for
1000 Mbps, and 10G for 10 Gbps) and the duplex (F for full duplex or H for half
duplex). It also shows the cable type (Copper or Fiber).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the
port. (See Section 10.1.3 on page 92
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the transmission speed of data sent on this port in kilobytes per
second.
Chapter 6 System Status and Port Statistics
for more information.)
59