FILL IN
This is designed for use as a temporary and regular rhythmic pattern to spice up a
repeating rhythm. There are four Fill In sections that can be played by pressing the
selected (lit) MAIN/FILL IN [A] – [D] buttons as desired. When one measure
pattern of Fill In finishes playing, the rhythm is automatically shifts to the Main
section.
BREAK
This lets you add dynamic variations and breaks in the rhythm pattern. The Break
section is selected by pressing the [BREAK] button. When the one-measure Break
pattern finishes playing, the rhythm automatically shifts to the Main section.
The lamp is lit when the Break section is selected
ENDING
This is used for the ending of the song. There are three Ending sections that can be
selected with the ENDING [1] – [3] buttons. When the ending is finished, the
rhythm automatically stops.
Operating the rhythm from the panel
You can turn the rhythm on/off and switch the sections as desired by pressing the
buttons on the panel. Using the Fill Ins and Break patterns let you add dynamic
interest and "spice" to your performance.
To start/stop the rhythm:
START
The rhythm begins as soon as the [START] button is pressed.
To stop the rhythm, press the button again.
SYNCHRO START
The [SYNCHRO START] button puts the rhythm in "standby."
The rhythm starts when you press a note on the Lower keyboard or
Pedalboard.
When you start the rhythm with the [SYNCHRO START] button,
pressing this button again stops the rhythm.
MAIN / FILL IN
A
B
C
D
Selected Fill In section's lamp flashes
SYNCHRO
START
BREAK
START
ENDING
1
2
3
Selected Ending section's lamp is lit
SYNCHRO
START
START
SYNCHRO
START
START
ELS-01/01C/01X Owner's Manual
5
53