Confirming The Version Of Your Electone; Factory Set (Initializing The Electone) - Yamaha Electone STAGEA ELS-01C Owner's Manual

6
Confirming the Version of Your Electone
You can confirm the version of your Electone by the following procedure.
1
Press the [UTILITY] button to call up the GLOBAL Page of the
Utility Display.
2
Press the [Version] button in the display.
The Version dialog appears in the display. Pressing [OK] closes the dialog.
7

Factory Set (Initializing the Electone)

All current settings including Registration Memory, User Voices, User Rhythms, and
LCD Display settings can be deleted at once by the following procedure. Be careful
when executing Factory Set, since it erases all your existing data. Always save your
important data to external media, such as a SmartMedia card.
Factory Set does not reset the Internet Direct Connection settings. If you want to reset
the Internet Direct Connection settings, see page 201.
1
Turn off the power.
2
While holding down the ENDING [1] button, turn the power back
on.
3
Release the ENDING [1] button after Voice Display appears.
If you don't want to reset the LCD Display settings, you can initialize only Registration
settings. See page 84 for more information.
ENDING
1 2 3
POWER
ELS-01/01C/01X Owner's Manual
Reference Page
Saving Registrations
(page 107)
Reference Page
Initializing Internet Settings
(page 201)
Reference Page
Initializing Registration
Memory (page 84)
21
1