Yamaha Electone STAGEA ELS-01C Owner's Manual page 66

5
66 ELS-01/01C/01X Owner's Manual
3
Select the desired percussion kit.
As a default, EL Kit is assigned to the keyboards but you can change the kit from
a total of 16 different kits. Pressing the Kit button on the display calls up the
Percussion Kit List. Choose the desired Kit within the list, then press the
[CLOSE] button at the top right of the display to close the list.
For details of percussion assignments for each kit, see the Preset Keyboard
Percussion List on page 67.
The message "Are you sure you want to clear all assignments and setup data?" may
appear when you change the kit. Select [CLEAR] to clear all assignments (made in
the ASSIGN Page) and detailed settings (made in the SETUP Page) and call up the
selected kit on the panel. Select [CANCEL] to call up the selected kit without
erasing the assignments and detailed settings.
4
Adjust the volume and amount of reverb applied to the Keyboard
Percussion.
Two sliders in the K.B.P. display determine the reverb and volume settings.
The settings here determine the reverb/volume for the entire Keyboard
Percussion setup, not for each percussion instrument. You can, however, adjust
each percussion instrument's reverb/volume (page 74).
5
Play some notes on the keyboards and/or Pedalboard.
DATA CONTROL