Programming A Registration Sequence - Yamaha Electone STAGEA ELS-01C Owner's Manual

Programming a Registration Sequence

The Registration Sequence feature allows you to have desired Registrations
automatically called up in sequence, when playing a Rhythm Sequence. It lets you
program the timing (bar/beat/clock) at which the Registration is changed. You can also
program the Next Regist function in Registration Sequence.
A Registration Sequence is saved as a part of the corresponding Rhythm Sequence.
With this feature, you can have the sounds of the instrument change as desired
automatically to match the Rhythm Sequence playback.
1
Press the [REGIST] button at the top right in the display to call up
the Registration Sequence display.
The Registration Sequence is programmed from this display. The entered
Registration number is shown along the Registration row in the middle of the
display.
2
Press the desired numbered button in the Registration Memory
section.
13 14 15 16
3
Using the
set the Bar/Beat/Clock position at which you want to change the
Registration (1 beat = 96 Clock).
When using the Data Control dial, first press the number you wish to change in
the display, then turn the dial.
1 2 3 4
buttons in the display or the Data Control dial,
5 6 7 8 9
DATA CONTROL
ELS-01/01C/01X Owner's Manual
NOTE
If you are loading a
Registration while a rhythm is
playing, the sequence data
and User rhythms in the
Registration data cannot be
loaded.
10 11 12 D.
175
9