Automatic Accompaniment - Auto Bass Chord (A.b.c.) - Yamaha Electone STAGEA ELS-01C Owner's Manual

5
Reference Page
POLY (page 40)
62 ELS-01/01C/01X Owner's Manual
3
Adjust the volume and amount of reverb applied to the
Accompaniment.
Pressing the same rhythm button on the panel again calls up the Rhythm
Condition display.
The two sliders at the right side of the display can control the Accompaniment
volume and reverb. Touch the slider in the display or use the Data Control dial
to adjust the volume/reverb.
Automatic Accompaniment
5
– Auto Bass Chord (A.B.C.)
The Auto Bass Chord (A.B.C.) function works with the Rhythm section of the
Electone to automatically produce bass accompaniment as you play. It adds an entirely
new dimension to your performance by effectively putting a full backing band at your
disposal. There are three modes used for producing Automatic Accompaniment
patterns.
Before using the A.B.C. function, turn Pedal Poly off. If Pedal Poly is set to on, the bass
pattern of the A.B.C. will not sound.
To set the A.B.C. function:
Press the [A.B.C./M.O.C.] button.
A.B.C./M.O.C. Display
DISPLAY SELECT
VOICE A.B.C.
DISPLAY M.O.C. MDR
FOOT
SWITCH UTILITY INTERNET
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE
U.ORGAN L.ORGAN ROTARY SP
FLUTES FLUTES SPEED
The A.B.C./M.O.C. display appears. The A.B.C. section is at the left half of this display.
1 2
DATA CONTROL