Checking The Remaining Memory - Yamaha Electone STAGEA ELS-01C Owner's Manual

7
126 ELS-01/01C/01X Owner's Manual
3
Confirm that the desired song to be converted is shown in upper
half of the display.
If you want to change the song, press the [CHANGE] button of the Change
From section to call up the Song Select display and select the desired song.
4
Press the [CHANGE] button of the Change To section in the
display, then select the destination.
The specified destination location must be within the range of Song 1 - 100 in
the SmartMedia card or USB flash memory. If a destination is not selected, an
empty song is automatically set as the destination.
5
Press the [EXECUTE] button in the display to start conversion.
A message appears, prompting confirmation of the operation. Select
[CONVERT] to convert to EL format, or [CANCEL] to abort the operation.
If the remaining memory of the SmartMedia is insufficient, conversion cannot
be executed. (An error message appears and the operation is cancelled.)

Checking the Remaining Memory

In the TOOLS Page, press the [REMAINING MEMORY] button. This allows you to
check the remaining memory in the media and the song data capacity of the currently
selected song.