Yamaha Electone STAGEA ELS-01C Owner's Manual page 156

9
156 ELS-01/01C/01X Owner's Manual
4
Set the appropriate Quantize value.
For details on the Quantize function, refer to page 152.
5
Set the Gate Time.
You can adjust the Gate Time setting by using GATE TIME
in the display, or Data Control dial.
Gate time determines the actual length of time a note sounds. For example, a
quarter note is sometimes played as tenuto (long length) and sometimes played as
staccato (short length).
Since 1 beat is made up of 480 clocks, a quarter note played tenuto may have a gate
time between 450 – 470, and a staccato quarter note may be about 240.
6
Enter the Rhythmic Chord pattern.
The methods for entering the Rhythmic Chord pattern are the same as those for
entering the rhythm pattern. Any key you press sounds a C major triad chord
(C, E, and G). For information on Step Write, see page 147; for information on
Real Time Write, see page 153.
You can also edit the entered Rhythmic Chord pattern using the same method as in
"Editing Entered Percussion Notes" (page 148). To change the gate time of the notes of
the Rhythmic Chord pattern, follow the instructions below.
buttons
DATA CONTROL