Programming A Sequence - Yamaha Electone STAGEA ELS-01C Owner's Manual

2
Press one of the Sequence buttons ([SEQ. 1] – [SEQ. 4]) on the
left half in the display to select the rhythm sequence number you
want to edit.
The lamp of the selected numbered sequence button in the Rhythm section
lights.
Instead of pressing the Sequence button on the display, you can
press one of the sequence buttons in the Rhythm section on the
panel to select the sequence number.
This selects the Sequence number, to which a rhythm composition can be saved.
If you want to copy a rhythm composition from another Sequence number, go
on to the next step.
3
Press the Sequence button ([SEQ. 1] – [SEQ. 4]) of the copy
source on the right half in the display.
A message appears, prompting confirmation of the operation.
4
Press [COPY] to execute the operation, or select [CANCEL] to
abort the operation.

Programming a Sequence

1
Press the [RHYTHM] button at the top right of the display to call
up the RHYTHM Page.
2
Press the rhythm button corresponding to the rhythm you want
to enter to the sequence. If you press User button [1] or [2], you
can select a rhythm of your own creation (User rhythm).
The rhythm menu of the selected rhythm button is displayed.
SEQ. SEQ.
1 2
SEQ. SEQ.
3 4
RHYTHM
MARCH WALTZ SWING& POPS R & B
JAZZ
LATIN WORLD BALLAD ROCK DANCE
MUSIC
RHYTHM
MARCH WALTZ
SEQ. SEQ.
1 2
LATIN WORLD
SEQ. SEQ.
MUSIC
3 4
VOLUME
MAX
1
2
MIN
ELS-01/01C/01X Owner's Manual
SWING&
JAZZ
BALLAD
171
9