Midi Control - Yamaha Electone STAGEA ELS-01C Owner's Manual

5

MIDI Control

When you connect your Electone with a second MIDI device (such as a synthesizer or
computer), you can determine how the Electone controls that MIDI device, or how the
Electone is controlled.
1
Press the [UTILITY] button in the panel to call up the Utility
Display.
2
Press the [MIDI] button at the top right of the display to call up
the MIDI Page.
1
2
1
OUTPUT
For setting the channels over which MIDI information will be transmitted. Any
channel from 1 through 16 can be assigned to each keyboard, the Upper keyboard, the
Lower keyboard and the Pedalboard. The MIDI messages on each keyboard will be sent
on the channels set here. You must set the transmit channel here to match the receive
channel of the connected device.
Pressing each OUTPUT button calls up the channel selection pop-up menu. After you
select the desired channel, the pop-up menu automatically closes.
2
MIDI OUT FILTER
Deletes unnecessary MIDI data and keeps it from being transmitted from the Electone.
After Touch and Rhythm start/stop are automatically filtered on the ELS-01.
In addition, Horizontal Touch and Second Expression are automatically filtered on the
ELS-01C/01X. Set the parameter for which you wish to disable transmission to ON.
3-1 3-2 3-3
3
ELS-01/01C/01X Owner's Manual
1 3
217