Saving Rhythm Pattern And Rhythm Sequence Data To External Media - Yamaha Electone STAGEA ELS-01C Owner's Manual

To start a sequence using the Left Footswitch:
You can start or stop the Rhythm Sequence playback using the left footswitch.
1
Press the desired Sequence buttons, making sure that all their
LEDs are lit.
2
Press the [FOOT SWITCH] button on the panel to call up the
Footswitch display, LEFT Page.
3
Set the control mode of the Footswitch to RHYTHM STOP.
(See page 180 for information about the Footswitch settings.)
4
Press the Left Footswitch with your right foot to turn the
sequence on.
Pressing the Left Footswitch again in the middle of the sequence playback
cancels the Rhythm Sequence.
When you are playing a Rhythm Sequence that is made up of several sequences
(SEQ. buttons), pressing the Left footswitch turns off the currently playing
Rhythm Sequence, and pressing it again starts the next sequence.
Saving Rhythm Pattern and Rhythm
4
Sequence Data to external media
You can save your own rhythm patterns (created in the Rhythm Pattern Program) and
Rhythm Sequence (created in the Rhythm Sequence Program) to external media, such
as SmartMedia cards. Refer to the section "Saving Registrations as Registration Data
(File)" on page 107 for instructions.
When loading your original Rhythm data from external media back to the Electone, be
sure to stop the rhythm if it is playing. Loading cannot be executed when a rhythm is
running.
ELS-01/01C/01X Owner's Manual
9
179