Saving The Edited Voice - Yamaha Electone STAGEA ELS-01C Owner's Manual

3

Saving the edited Voice

Edited AWM Voices can be saved as User Voices (up to sixteen), and edited VA Voices
can be saved as VA Custom Voices (up to six).
1
Press the [SAVE] button at the top right of the display to call up
the SAVE Page.
When saving User Voices (AWM)
2
Select the User Voice number or VA Custom Voice number you
wish to save to.
The message appears to prompt confirmation of the operation. (Saving a new
Voice automatically erases the Voice previously stored to the selected User
number.)
3
(If necessary) Press the [RENAME] button to give a name to your
original Voice.
The method for editing the name is the same as the one for the song name in the
M.D.R. section. (See page 104 for more information.) Up to sixteen characters
can be entered.
4
Press the [SAVE] button to save the Voice, or press [CANCEL] to
abort the operation.
This operation automatically erases any Voice that had been previously
saved to the selected User Voice number or VA Custom Voice number. Be
careful not to erase any important data. Always save your important data in
advance to a SmartMedia card or other external media using the M.D.R.
function.
After saving the Voice, be sure to quit the Voice Edit function (page 138) before
turning the power off. Turning off the Electone without quitting Voice Edit erases the
User Voice you have edited.
When saving VA Custom Voices (VA)
ELS-01/01C/01X Owner's Manual
8
137