Appendix; Bench Assembly - Yamaha Electone STAGEA ELS-01C Owner's Manual

14

Appendix

Bench Assembly

Have a Phillips-head (+) screwdriver ready.
Bench for the ELS-01
1
Turn the bench board over and install two
legs for the front side.
Tighten the bolts using the included wrench (as shown).
Make sure to put washers between the bolts and
the bench board.
Logo is written on back
2
Install the foot rest to the legs with the
included four screws, using a screwdriver.
3
Install the two legs for the back side.
Washer
R Bolt
L
Bench for the ELS-01C/01X
1
Turn the bench board over and install the
legs with the included eight screws.
Tighten the screws using the included hexagonal
wrench (as shown).
Make sure to put washers between the screws and
the bench board.
R
Logo is written
on back
Bolt
Washer
2
Install the foot rest to the legs with the
included four screws, using a screwdriver.
If the bench screws become loose due to extensive long-
term use, tighten them periodically using the included
tool and a screwdriver.
ELS-01/01C/01X Owner's Manual
L
1 4
219