Midi Control - Yamaha Electone STAGEA ELB-02 Owner's Manual

10
190
ELB-02 Owner's Manual
5

MIDI Control

When you connect your Electone with a second MIDI device (such as a synthesizer
or computer), you can determine how the Electone controls that MIDI device, or
how the Electone is controlled.
To select the MIDI page:
1
Press the [UTILITY] button.
The Utility display appears. The MIDI Pages are found on Pages 4 – 5.
2
Use the PAGE buttons to select Pages 4 – 5.
Internal/External Display
1
2
3
Internal/External
Switches control over the displayed items between the Electone (Internal) or
the connected device (External).
1 Lead1
Determines Internal or External control of the Lead Voice 1.
Successive presses of the [A] button alternates between Internal and External.
Internal: Lead Voice 1 is played from the Upper Keyboard of the Electone. (If the
To Lower function is on, it is played from Lower Keyboard.)
External: Lead Voice 1 is played from the connected instrument via MIDI
channel 4.
2 Synchro
Determines the source of the timing control, for rhythm synchronization
purposes.
Successive presses of the [B] button alternates between Internal and External.
Internal: Pressing the Rhythm [START] or [SYNCHRO START] button on the
panel enables control of and synchronization to any connected devices
(e.g., sequencer, etc.).
External: Starting the rhythm of a connected rhythm machine also starts the
rhythm of the Electone.