Programming A Sequence - Yamaha Electone EL-900 Owner's Manual

2) Programming a Sequence

1
Select the type of rhythm you wish to enter, Preset or User.
2
Select the desired rhythm by pressing the appropriate button in the
Rhythm section, then select SET in the display to enter the pattern.
(Refer to the Rhythm Pattern Number Table below for a list of the
rhythms and their number assignments.)
･ When PRESET is selected in step #1 above, the Rhythm buttons
are used to select the Preset rhythm names printed at the top.
･ When USER is selected, however, these buttons function according
to the User numbers and letters printed at the bottom. Select the
User pattern by pressing one of the numbered buttons (1-8), then
a lettered button (A, B, C, or D) or FILL (for User Fill In).
SEQ. SEQ. MARCH
1 2
USER 1
SEQ. SEQ. TANGO
3 4
USER 5
Press these Data Control buttons to
select PRESET and USER, alternately.
RHYTHM
WALTZ SWING BOUNCE SLOW
ROCK
USER 2 USER 3 USER 4 A
LATIN 1 LATIN 2 8 BEAT 16 BEAT
USER 6 USER 7 USER 8 C
Currently selected pattern, or the pattern
at the current cursor position.
Press SET to select the rhythm pattern.
You can program the rhythm sequence a
measure at a time. Every User rhythm
consists of two measures. If you want to
program two-measure User rhythms, you
are required to enter it twice, for the first
measure and the second measure.
When entered, the first measure is
displayed as positive box
second measure is displayed as negative
box
The rhythm patterns can be divided into
four groups: Normal such as
VOLUME
Intro, Fill In and Ending. When changing
MAX
the type, for example, from Normal to Fill
1
B I n a n d F i l l I n t o N o r m a l w h i l e
programming a rhythm sequence, the first
measure of the newly selected type will
2
D always be selected and follow. However,
MIN when the same type continues even
though you change the rhythm, for
example, from
measure may succeed the sequence. That
means some of the User rhythms inserted
in a rhythm sequence may begin from its
second measure.
To keep this from happening and begin
the newly selected rhythm from the first
measure, insert a different type, Fill In,
before using the new rhythm pattern.
A maximum of 120 patterns can be entered
to a single sequence.
and the
.
and
to , the second
NOTE:
,
9
145