Setting Up Postscript And/Or Pcl Printing With Windows Nt 4.0 - Xerox DocuColor DocuColor 4 User Manual

1.3 Setting up PostScript and/or PCL
printing with Windows NT 4.0
To set up the DocuColor 4 LP/CP as a PostScript printer you must install the
Microsoft Windows NT PostScript printer driver. This driver is not included
on the User Software CD, so, if the DocuColor 4 LP/CP is the first PostScript
printer to be used with your system, you will need to install this printer driver
from your Windows NT 4.0 installation CD or disk.
When the Windows NT PostScript Printer Driver is installed on your system,
you can set up the DocuColor 4 LP/CP as a PostScript printer by installing
the DocuColor 4 LP/CP PPD. This file is included on the User Software CD.
You can set up the DocuColor 4 LP/CP as a PCL printer by installing the PCL
Printer Driver and PPD. These files are included on the User Software CD.
When you have finished installing the drivers and files, you will need to
configure a particular type of connection between the workstation and the
DocuColor 4 LP/CP.
The instructions below describe installing a printer locally. Adding a printer
to a local system requires that you log in to your local Windows NT worksta-
tion (not the network server domain) and that you are a member of the Ad-
ministrators group. The procedure for adding a network printer is similar to
adding a port. This procedure is described in "Setting up TCP/IP and LPR
printing with Windows NT 4.0" on page 23.
If autorun is enabled on your computer, the installer on the User Software
CD runs automatically when the User Software CD is inserted in the CD-
ROM drive, allowing you to specify the files to install on your computer.
If autorun is not enabled, you can run the installer by double-clicking the
CD-ROM drive icon in My Computer, or by double-clicking the Setup.exe
file in the Installr folder on the User Software CD. If optional devices are
installed on your printer, follow the instructions in the next section as well.
If this is the first PostScript printer installed on your computer and you at-
tempt to install the DocuColor 4 LP/CP PPD, the Files Needed dialog box
will appear, prompting you to locate the PostScript driver PSCRIPT.DLL for
Windows NT 4.0.
1
13