Electrical Safety; Disconnect Device - Xerox DocuColor DocuColor 4 User Manual

Use the power cord supplied with your Xerox printer/copier.
Do not use a ground adaptor plug to connect the printer/copier to a power source recep-
tacle that lacks a ground connection terminal.
Plug the power cable directly into a properly grounded electrical outlet. Do not use an
extension cord. If you do not know whether an outlet is grounded, ask an electrician to
check the outlet.
WARNING: You may get a severe electrical shock if you do not connect the grounding
conductors properly.
Do not place the printer/copier where people may step on the power cable.
Do not place objects on the power cable.
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings. These openings are provided to
prevent overheating of the printer/copier.
WARNING: Do not push objects into slots and openings on the copier. Making a con-
tact with the voltage point or shorting out a part could result in fire or electrical shock.
If you notice unusual noises or odors, switch off the printer/copier power immediately.
Disconnect the power cable from the electrical outlet. Call an authorized Xerox service
representative to correct the problem.
If any of the following conditions occur, switch off the printer/copier power immedi-
ately, disconnect the power cable, and call an authorized Xerox service representative.
The power cable is damaged or frayed.
Liquid is spilled into the printer/copier.
The printer/copier is exposed to water.
Any part of the printer/copier is damaged.

Disconnect Device

DocuColor 4 LP (Printer only)
The power cord is the disconnect device for this printer. The power cord is attached to
the printer as a plug-in device at the back of the printer. In the event it is necessary to
remove all electrical power from the printer, disconnect the power cord from the power
receptacle at the back of the printer.
DocuColor 4 CP
The power cord is the disconnect device for this printer/copier. The power cord is at-
tached to the scanner as a plug-in device that services both the printer and scanner. In
the event it is necessary to remove all electrical power from the printer/copier, discon-
nect the power to the scanner.
viii

Electrical Safety