Watchguard Firebox X15 User Manual page 93

4. Click Scan to have the Edge find all known hardware addresses on the network. If you want the Edge
to try to resolve host names for all Windows computers it finds during the scan process, make sure the
Try to resolve Windows host names during scan check box is selected. This can make the scan
procedure take more time.
The Scan Allowed Address Control dialog box appears
5. Select one or more devices that you want to add to your list of allowed MAC addresses for this interface.
Make sure that the Media Type is identified and is correct, because a computer with more than one NIC
card can have more than one MAC address. Click OK to add the device or devices to your list of allowed
MAC addresses.
Press and hold the CTRL key to select more than one device. You can select from more than one column at the
same time.
User Guide
.
Network Settings
81