Watchguard Firebox X15 User Manual page 297

To create a rule, click New. Use the four tabs in the Firewall Rule Entry dialog box to define the traffic you
want to control:
General tab
Local tab
Remote tab
Applications tab
General tab
You can define the basic properties of your firewall rules on the General tab of the Firewall Rule Entry
dialog box.
Rule Name
Type a descriptive name for this rule. For example, you might create a rule called Web surfing that
includes traffic on TCP ports 80 (HTTP), 8080 (alternate HTTP), and 443 (HTTPS).
State
To make a rule inactive, select Disabled. New rules are enabled by default.
Direction
To apply the rule to traffic that comes from your computer, select outgoing. To apply the rule to
traffic that is sent to your computer, select incoming. To apply the rule to all traffic, select
bidirectional.
Assign rule to
Select the check boxes adjacent to the network types that this rule applies to.
Protocol
Use this drop-down list to select the type of network traffic you want to control.
User Guide
About Mobile VPN with IPSec
285