See Vpn Statistics - Watchguard Firebox X15 User Manual

Configure VPN Keep Alive
To keep the VPN tunnel open when there are no connections through it, you can use the IP address of a
computer at the other end of the tunnel as an echo host. The Firebox X Edge e-Series sends a ping each minute
to the specified host. Use the IP address of a host that is always online and that can respond to ping messages.
You can enter the trusted interface IP address of the Firebox that is at the other end of the tunnel. You also can
use more than one IP address so the Edge can send a ping to more than one host through different tunnels.
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select VPN > Keep Alive.
The VPN Keep Alive page appears.
3. Type the IP address of an echo host. Click Add.
4. Repeat step 3 to add additional echo hosts.
5. Click Submit.

See VPN statistics

You can monitor Firebox X Edge e-Series VPN traffic and troubleshoot the VPN configuration with the VPN
Statistics page.
To see the VPN Statistics page:
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select System Status > VPN Statistics.
The VPN Statistics page appears.
User Guide
Branch Office Virtual Private Networks
in the browser address bar, and the IP address
https://
in the browser address bar, and the IP address
https://
263