Watchguard Firebox X15 User Manual page 183

3. Select the Enable Traffic Control check box.
The Interactive traffic list is enabled.
4. In the Upstream bandwidth limit text box, type the upstream bandwidth limit of your external
network connection (WAN1). Enter a value from 19 Kbps to 100,000 Kbps. The default setting is
512 Kbps.
5. Select the Prioritization check box if you want to add filters to other network traffic categories.
The prioritization lists are enabled.
6. To create filters for the interactive, high, medium, or low traffic categories, click the Add button
adjacent to the category name. Choose a policy or VPN tunnel, then click Select. Hold down CTRL to
select more than one at a time. To delete a filter, click Remove.
7. If you want to use Traffic Control marking, select IP Precedence or DSCP from the Marking Type drop-
down list. You can then select the mark you want applied for each traffic category with the Mark drop-
down list at the top of each traffic category.
8. Click Submit.
Traffic control is enabled.
User Guide
Traffic Management
171