Watchguard Firebox X15 User Manual page 32

Installation
Run the Quick Setup Wizard
The Quick Setup Wizard starts after you type
Internet browser. If your browser blocks pop-up windows, you must disable that function to complete the
Quick Setup Wizard. You must use the wizard to configure the Ethernet interfaces. You can change the
configuration of the interfaces after you complete the Quick Setup Wizard.
The Quick Setup Wizard includes this set of dialog boxes. Some dialog boxes appear only if you select certain
configuration methods:
Welcome
The first screen tells you about the wizard.
Configure the External Interface of your Firebox
Select the method your ISP uses to assign your IP address.
Configure the External Interface for DHCP
Type your DHCP identification as supplied by your ISP.
Configure the External Interface for PPPoE
Type your PPPoE information as supplied by your ISP.
Configure the External Interface enwith a static IP address
Type your static IP address information as supplied by your ISP.
Configure the Trusted Interface of the Firebox
Type the IP address of the trusted interface.
Set the User Name and Passphrase
Enter a user name and passphrase for the administrator account for the Edge.
Set the Wireless Region
(For wireless models only.) Type the country or region in which the Firebox X Edge e-Series Wireless
is being used. The country or region cannot be changed after it is set.
Set the Time Zone
Use this screen to set the time zone the Firebox X Edge is operating in.
Enter the feature key
(Optional) Paste the feature key text that you copied from the LiveSecurity web site into the empty
field.
The Quick Setup Wizard is complete
The Quick Setup Wizard shows a link to the WatchGuard web site to register your product. After you
complete the wizard, the Firebox X Edge restarts.
The System Status page
The System Status page appears on the screen. You can configure more features of your Edge from
this page.
20
If you change the IP address of the trusted interface, you must change your network settings so that
your IP address matches the subnet of the trusted network before you connect to the Firebox X Edge
again. If you use DHCP, restart your computer. If you use static addressing, see
address.
https://192.168.111.1
into the URL or address field of your
Use a static IP
Firebox X Edge e-Series