Watchguard Firebox X15 User Manual page 284

About Mobile VPN with IPSec
Enable Mobile VPN for a Firebox user account
1. To connect to the Edge System Status page, type
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. To add a new Firebox user, select Firebox Users > New User.
You can also edit the properties of an existing user. Go to the main Firebox User page and find the name of the
user account you want to edit.
3. On the Settings tab, type an Account Name for the user. Type the password for the user. This is
different from the shared secret you type in step 7 below.
The Full Name and Description fields are optional.
4. Click the MOVPN tab.
5. Select the Enable Mobile VPN with IPSec for this account check box.
6. Type a shared key in the Shared key field.
The .wgx file is encrypted with this shared key. Do not give the shared key to any user that is not
authorized to use this Firebox user account.
7. Type the virtual IP address in the related field.
The virtual IP address must be an address on the Firebox X Edge trusted or optional network that is not
used and is not included within any range of DHCP addresses assigned by the Edge. This address is
used by the remote computer to connect to the Firebox X Edge.
8. If necessary, change the Authentication Algorithm or Encryption Algorithm settings.
9. Set Mobile VPN key expiration in kilobytes and/or hours. The default values are 8192 KB and 24 hours.
To remove a size and/or time expiration, set the value to zero (0).
272
in the browser address bar, and the IP
https://
Firebox X Edge e-Series