Watchguard Firebox X15 User Manual page 31

Use a static IP address
This procedure configures a computer with the Windows XP operating system to use a static IP address. If your
computer does not use Windows XP, read the operating system help for instructions on how to set your
computer to use a static IP address.
You must select an IP address on the same subnet as the trusted network.
1. Select Start > Control Panel.
The Control Panel window appears.
2. Double-click the Network Connections icon.
3. Double-click the Local Area Connection icon.
The Local Area Connection Status window appears.
4. Click the Properties button.
The Local Area Connection Properties window appears.
5. Double-click the Internet Protocol (TCP/IP) list item.
The Internet Protocol (TCP/IP) Properties dialog box appears.
6. Select the Use the following IP address option.
7. In the IP address field, type an IP address on the same network as the Edge trusted interface. We
recommend 192.168.111.2.
The default trusted interface network is 192.168.111.0. The last number can be between 2 and 254
8. In the Subnet Mask field, type
9. In the Default Gateway field, type the IP address of the Edge trusted interface.
The default Edge trusted interface address is 192.168.111.1.
10. Click OK to close the Internet Protocol (TCP/IP) Properties dialog box.
11. Click OK to close the Local Area Network Connection Properties dialog box. Close the Local Area
Connection Status, Network Connections, and Control Panel windows.
Your computer is ready to connect to the Firebox X Edge.
12. When the Edge is ready, start your Internet browser.
13. Type
https://192.168.111.1/
asked to accept a security certificate, click OK.
The Quick Setup Wizard starts.
14. Run the Quick Setup
User Guide
255.255.255.0
into the URL entry field of your browser and press Enter. If you are
Wizard.
.
Installation
.
19