Watchguard Firebox X15 User Manual page 277

19
About Mobile VPN with PPTP
You can use Point-to-Point Tunneling Protocol (PPTP) to make secure VPN tunnels. You can configure the
Firebox X Edge e-Series as a PPTP VPN endpoint and allow up to 10 users to make simultaneous secure
connections to the Edge and access the networks protected by the Edge.
Before remote users can connect to the Firebox with PPTP, you must:
Configure the Edge with the first of 10 available sequential IP addresses on the trusted or optional
network that are currently not in use. The Edge must be able to give these IP addresses to remote users
when they try to connect with PPTP.
Enable PPTP connections in each remote user's Firewall user profile. When a user makes a PPTP
connection to the Edge, the user is then given full access to the trusted or optional network.
User Guide 265