Table of Contents
Advertisement
Red Retaining
Screws
8.1
If you are using one of the enclosed pipe/ball assemblies, it is now time
for you to activate the Auto Balance
retaining screws. Rotate the blades slowly until one of the red retaining
screws is visible through the notch in the mounting plate. Remove the
retaining screw from the bottom of the fan housing using a screwdriver.
Repeat this process for all 5 retaining screws.
8 • Activating Auto Balance
Note: After the
retaining screws
are removed,
the blades will
feel loose. This
is normal, as
loose blades are
a characteristic
of the Auto
Balance
system.
system by removing the five red
TM
42798-01 • 12/28/09 • Hunter Fan Company
TM
8.2
TM
If you are using a pipe/ball assembly longer than 6 inches, leave the
retaining screws in their place and continue the installation process.
15
15
Hide quick links:
Advertisement
Table of Contents
