66
7.1
46
Squeeze the rubber blade grommets (66) into the holes in the blades (46).
7.3
Loosen (DO NOT REMOVE) the blade-to-arm screws (47) that are holding
the shipping bumpers in place. Push the shipping bumpers in, then lift
them off.
7 • Assembling the Blades
47
42798-01 • 12/28/09 • Hunter Fan Company
7.2
44
Attach each blade (46) to a blade arm (44) using three blade assembly
screws (67). The blades may appear slightly loose after screws are
tightened. This is normal.
7.4
44
Slide the blade arms (44) onto the blade-to-arm screws (47). Tighten the
blade-to-arm screws (47) as tight as possible with a screwdriver.
14
14
67
46
47