Hunter 20578 Quick Start Manual And Installation Manual page 16

5.2
Using the large wire connectors (70), connect the white wire and the black
wire from the ceiling as follows:
• The white (common) power wire from the ceiling to the white wire from
the
receiver (marked on red tag "NEUTRAL IN")
• The black power wire from the ceiling to the black wire from the receiver
(marked on red tag "LIVE IN")
5.4
Using the small wire connectors (70), connect the wire from the fan as follows:
• The white wire from the fan to the white wire from the receiver (marked on
white tag "COMMON OUT")
5 • Wiring the Fan
WARNING! - Be
sure no bare wire
or wire strands
after making
connections.
12 12
42798-01 • 12/28/09 • Hunter Fan Company
5.3
Using the small wire connectors (70), connect the wires from the fan as follows:
• The black wire with a white stripe from the fan to the red wire from the receiver
(marked on white tag "LIGHT OUT")
• The black wire from the fan to the black wire from the receiver (marked on
white tag "FAN OUT")
are visible
Push all wires and wire connectors (70), except for the white antenna wire
from the receiver (86), back through the ceiling mounting plate (2) into the
outlet box. Position the receiver (86) in the ceiling mounting plate cover so
that the antenna is close to the edge for clear reception.