Activating Perfect Balance Tm - Hunter 23902 Installation And Operation Manual

Type 2 models

Hide thumbs Also See for 23902:

Table of Contents

7-1. If you are using one of the enclosed downrods, it is now time

for you to activate the Perfect Balance

five red retaining screws. Rotate the blades slowly until one of the

red retaining screws is visible through the notch in the mounting

plate. Remove the retaining screw from the bottom of the fan

housing using a screwdriver. Repeat this process for all 5 retaining

screws.

Note: After the retaining screws are removed, the blades will feel loose.

This is normal, as loose blades are a characteristic of the Perfect

Balance

system.

7-2. If you are using a downrod longer than 6 inches, leave the

retaining screws in their place and continue the installation

process.

7 • Activating Perfect Balance

system by removing the

Switch Housing

Mounting Plate

Red Retaining

Screws

42776-01 • 04/29/08 • Hunter Fan Company

Notch

Steps 7-1 – 7-2

Table of Contents