1. Manuals
  2. Brands
  3. Hunter Manuals
  4. Fan
  5. Hunter Ceiling fans
  6. Installation and operation manual

Hunter Ceiling Fans Installation And Operation Manual

Hide thumbs Also See for HUNTER Ceiling Fans:
Table of Contents

Advertisement

Quick Links

See also: Instruction and Installation Manual , Operation & Installation Manual
41884-01 • 10/13/04

Advertisement

Table of Contents
loading

Related Manuals for Hunter HUNTER Ceiling Fans

Summary of Contents for Hunter HUNTER Ceiling Fans

  • Page 1 41884-01 • 10/13/04...

  • Page 2: Table Of Contents

    8 • Operating and Cleaning • To reduce the risk of fire, electrical shock, or motor damage, do not Your Ceiling Fan ..........14 use a solid-state speed control with this fan. Use only Hunter speed 9 • Troubleshooting ........... 15 controls.
  • Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation fl exibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profi le, Standard, or Angle mounting.  e steps in this manual include instructions for all three Installer’s Choice mounting methods.

  • Page 4: Getting Ready

    • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...

  • Page 5: Installing The Ceiling Plate

    Do not over tighten. Steps 2-3 – 2-5 Flat Washer 3” Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing towards the ceiling peak. 41884-01 • 10/13/04 Hunter Fan Company...

  • Page 6: Assembling And Hanging The Fan

    3-5. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim. Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Step 3-5 U-shaped Hole #8-32 x 1” Screw Hunter Fan Company 41884-01 • 10/13/04...

  • Page 7: Wiring The Fan

    CAUTION: Be sure no bare wire or wire strands are visible after making connections. 4-6. Push all wires and wire nuts back through the ceiling plate hole into the outlet box. Wire Nut Step 4-4 41884-01 • 10/13/04 Hunter Fan Company...

  • Page 8: Installing The Canopy And Canopy Trim Ring

    2. Press fi rmly on opposite sides of the ring towards the canopy.  e tabs will fl ex out releasing the trim ring from the canopy Step 5-3 Steps 5-4 – 5-5 Canopy Screw Hunter Fan Company 41884-01 • 10/13/04...

  • Page 9: Assembling The Blades

    6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the Step 6-1 (Detail) blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

  • Page 10: Completing Your Installation With Or Without A Light Fixture

    7 • Completing Your Installation With or Without a Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. is feature gives you the option of installing the fan with OR without the included light fixture.
  • Page 11 7-8. e last installation step when installing the light fixture is to Lower Switch install the glass bowl. See “Installing the Glass Bowl” on page 13 for Housing instructions. Plug Connector Detail Housing Assembly Screw 41884-01 • 10/13/04 Hunter Fan Company...
  • Page 12 7. Install the switch housing cap and plug button to the lower switch housing. Steps 3 – 5 Male Dummy Terminal Female Dummy Terminal Plug Button Step 7 Hunter Fan Company 41884-01 • 10/13/04...
  • Page 13 Light Bulbs (60 Watt Maximum) through the fi nial and screw the fi nial onto the threaded Metal Rod rod end until tight. Metal Disk Pull Chain Glass Bowl Breakaway Connector Cover Plate Finial 41884-01 • 10/13/04 Hunter Fan Company...

  • Page 14: Operating And Cleaning Your Ceiling Fan

    On and Off . downward air fl ow pattern 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft.

  • Page 15: Troubleshooting

    3. Turn power off , support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888-830-1326 or visit us at our WEB site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 41884-01 • 10/13/04 Hunter Fan Company...

Table of Contents